To test to see if others can connect to you start a chart in server mode then go to:
Tools / Server Mode Connectivity Test / Test Server Connection
Open the Session Log and go to the end. You are looking for CONNECTION
PASSES. A typical test session looks like this:
19:46:32 Checking Availability of Test Server.
19:46:32 The Test Server is Reachable by Web Browser.
19:46:32 Checking Test Application Operation.
19:46:32 Test Server Working.
19:46:32 Test Socket Connected.
19:46:32 Connected to Test App.
19:46:32 Using Local Port : 1819
19:46:32 Accepted by Com Test Server.
19:46:52 Connection Request Rcvd
19:46:52 Client 1 is Com Test
19:46:52 Added Client 1
Used Port: 6500
19:46:52 NORMAL - CONNECTION PASSES.
19:46:52 Close Rcvd from Client # 1
19:46:52 Test Socket Disconnected.
The test relies on the availability of a special test server so if you see that the test server is not reachable the test cannot be run at that time.
Hint: If you receive a socket not available error, you may be trying to use the wrong local IP address. On your Option / Connections panel try changing the the local IP address to 0.0.0.0 and restarting Radio-SkyPipe. Make sure the new address matches the port forwarding you made in your firewall. For more information see the help pages for connection configuration issues.
Help Index | Radio-Sky Publishing Home